Foundation calculators that show their work
Work out concrete, bags, a site mix and simple size checks for slabs and strip footings. Use imperial or metric. Every result lists the assumptions behind it.
Calculators
- Concrete calculatorWork out concrete in cubic yards or cubic meters for a slab, footing or round column, plus 40, 60 or 80 lb bags and a site mix by strength class.
- Slab calculatorEstimate concrete for a slab foundation with an optional thickened edge, plus a rebar mesh estimate and bags or a site mix. Imperial or metric.
- Strip footing calculatorConcrete for a continuous footing measured along its centre line, with interior walls, plus frost depth, IRC width and projection checks. Imperial or metric.
Guides
- Strip foundationHow a strip foundation carries a house, how wide and deep the footing goes under the IRC and in Europe, rebar and cover basics, and the pour step by step.
- Slab foundationHow a slab on grade foundation works: monolithic slab with a thickened edge or floating slab, what goes under the concrete, mesh or rebar, and cost drivers.
- Concrete mix ratioWhat 1:2:3 and 1:2:4 really mean, cement, sand, gravel and water per cubic yard for 2,500 to 4,000 psi, and when a foundation needs ready-mix instead.
How these numbers are made
All three calculators run on one calculation engine with worked examples for every formula. The same engine powers the Foundation Calculator app for iPhone. Volumes follow plain geometry, bag counts use the yield printed by the bag maker, and the checks compare your footing with typical minimums from the International Residential Code and national frost defaults.
The calculators do not design a foundation. Soil, loads and the frost line where you build decide the real sizes, and those come from your local code, a soil report or a licensed engineer.